Usman Khurshid

Usman Khurshid is a seasoned IT Pro with over 15 years of experience in the IT industry. He has experience in everything from IT support, helpdesk, sysadmin, network admin, and cloud computing. He is also certified in Microsoft Technologies (MCTS and MCSA) and also Cisco Certified Professional in Routing and Switching. Reach him at Twitter @usmank11


  1. Change
    April 27, 2021 @ 11:51 AM

    I ran the batch enabled virtualization in my bios settings but when I check in my task manager, virtualization is still disabled. Also when I check in optional features, hyper v platform and hyper v hypervisor is grayed out saying “virtualization support is disabled in the firmware”.


  2. ****Yih
    March 18, 2021 @ 10:40 AM

    When I reboot my laptop, this line appears on the screen “couldn’t complete features undoing changes”


  3. ****Yih
    March 10, 2021 @ 1:13 PM

    When I reboot my laptop, this line appears on the screen “couldn’t complete features undoing changes”


  4. Naman Gupta
    January 14, 2021 @ 1:35 PM

    Hello Sir,

    I have successfully installed the hyper v but when I am checking in the task manager under virtualization section there still showing disabled


    • Usman Khurshid
      January 18, 2021 @ 9:14 AM

      You should enable virtualization from the system BIOS otherwise Hyper-V will not work.


  5. Aniruddha Jagtap
    December 12, 2020 @ 11:04 AM

    it takes so long time to get install ..


  6. Revathy
    November 16, 2020 @ 6:40 PM

    Thanks a lot! I have a doubt, sir. This is not regarding the hyper V installation but when I try to install CentOS7 on VM it shows that boot error and reboot by choosing a proper option. Can you please tell me a solution for this?


  7. Zain
    November 2, 2020 @ 9:55 PM

    Hi Usman, I installed this & it worked for me. But I am not able to uninstall it using the command that you pasted above. It only disables hyper v but I would like to uninstall it from my system. Any help would be appreciated.


    • Michael A Dempsey
      November 27, 2020 @ 9:07 PM

      Don’t worry about it. When the next windows feature upgrade happens it will disappear.


  8. Junnie
    October 27, 2020 @ 10:15 PM

    It takes so long to install, but thx


  9. oldschoolel
    September 22, 2020 @ 8:14 PM

    Thank You! This is the only Windows Pro feature I use and I could NOT justify the additional $99 to upgrade for ability to use one application.


  10. MD IMRAN
    August 21, 2020 @ 11:10 PM

    After RUnning your script. Hyper visor is installed but not showing in search.

    Could yould u please update on this.



    • Usman Khurshid
      August 24, 2020 @ 3:56 PM

      You can go to Start Menu –> Windows Administrative Tools –> Hyper-V.


      • Nate
        January 29, 2021 @ 12:45 AM

        thanks that was my question too.

        really appreciate the tutorial!


  11. Vestage Gaming
    June 28, 2020 @ 6:48 PM

    Thanks for the .bat file.

    I can’t seem to find Hyper-V.
    I’ve checked if it’s enabled, I ran the .bat as Adminstrator and even checked in the start menu. Can you please tell me where it is located?


  12. Ivan Herreño
    June 24, 2020 @ 3:20 AM

    Thanks, but it don´t works for my Win 10 2004:
    1. The featurename was changed from “Microsoft-Hyper-V” to “HypervisorPlatform” and “VirtualMachinePlatform”, yep two features.

    2. Once I enabled this two features and restart, I can view they are activated in the optionalfeatures, but I don’t find the hyper-v manager or equivalet in administrative tools or searching in windows search bar.

    I use es-mx win10 version, if someone has a win10 2004 in another idiom, please test and comment.


  13. Omar
    June 16, 2020 @ 3:55 AM

    Great work Usman, congratulations. I confess I was a little concerned about running a third party batch file, but it worked perfectly on my Windows 10 Home edition. However, I found that I have now another problem as Hyper-V is not working due to other(s) virtualization application(s) and I have to find them and discover how to disable them (the following message appers: “A hypervisor has been detected. Features required for Hyper-V will not be displayed”).


    • Usman Khurshid
      August 25, 2020 @ 4:48 PM

      The message you mentioned means that Hyper-V is enabled on your computer. It should work fine. Please try to open Hyper-V from Start Menu –> Administrative Tools.


  14. aaadfsgergrg
    June 8, 2020 @ 9:03 PM

    Great, but how i uninstall now?


  15. Eliran
    June 6, 2020 @ 8:12 PM

    Thank you very much! It worked. I would just add to others, that first you need
    to close your Visual Studio if it is open. Otherwise that Bat file will run in an infinite loop.


    • Vignesh D
      June 12, 2020 @ 9:47 PM

      Thank you soo much. Very Appropriate comment at the correct place. I was wondering what’s happening in the script.


      • Rémi
        August 22, 2020 @ 8:05 AM

        I don’t have Visual Studio, yet the BAT file has been running in loop for 15 min now. What to do???


        • nox
          March 30, 2021 @ 10:39 AM

          it’s not a loop, check hyper-v.txt as a reference, all you need to do is to wait. For those hesitating about the .bat file, you can edit it and check those codes.


  16. bik128
    June 1, 2020 @ 1:23 AM

    Great tutorial.
    Anyone know how to add users to Hyper-V Administrators group (to not need admin privileges) to run V-machines on Windows 10 Home then? (Since windows 10 have no typical group management console).


  17. Enrico
    May 23, 2020 @ 5:12 AM

    Hmm for some reason my PC now lags very badly.. I hope this changes after another restart.. how could this be?
    Thanks for the guide anyways!


    • Usman Khurshid
      May 23, 2020 @ 11:26 AM

      Hyper-V takes some resources for running smoothly. If you are low on resources, turning on Hyper-V will not be well advised.


  18. cédric
    May 22, 2020 @ 1:14 PM

    it’s OK for me thanks for this tuto


  19. Lip
    May 14, 2020 @ 2:09 PM

    You deserve a pint of beer


  20. Sparky
    May 10, 2020 @ 2:37 PM

    I just wanted to know that will it affect my windows license???


    • Usman Khurshid
      May 10, 2020 @ 5:12 PM

      No, it will not affect your Windows license in any way.


  21. DivineRipper
    April 26, 2020 @ 11:10 PM

    Hyper-v manager does not show in my search results but it is under Windows Administrative Tools in Start Menu.


    • Phu Do
      October 22, 2020 @ 10:42 PM

      Thanks Usman Khurshid and DivineRipper,
      I can’t see Hyper-V in Search but in Windows Administrative Tools.


  22. Mr.Jazz
    April 25, 2020 @ 9:21 AM

    How do I uninstall completley without System Restore?

    VMware is not working, so I need to completly remove this mod pleaze, need help!!


    • Usman Khurshid
      April 25, 2020 @ 1:02 PM

      Please open the command prompt with administrative privileges and run the following command:
      DISM /Online /Disable-Feature /All /FeatureName:Microsoft-Hyper-V

      This will remove all the installed features related to Hyper-V from your computer.


      • Mr.Jazz
        April 28, 2020 @ 9:00 AM

        When I do this I get this error

        C:\windows\system32>DISM /Online /Disable-Feature /All /FeatureName:Microsoft-Hyper-V

        Deployment Image Servicing and Management tool
        Version: 10.0.18362.1

        Image Version: 10.0.18363.815

        Error: 87

        The all option is not recognized in this context.
        For more information, refer to the help.

        The DISM log file can be found at C:\windows\Logs\DISM\dism.log

        I just want to run VMware again


        • Usman Khurshid
          April 28, 2020 @ 2:34 PM

          Please go to Run –> optionalfeatures. Uncheck everything related to Hyper-V.


        • Mozgosup
          April 29, 2020 @ 8:15 PM

          Remove /All from this command line – worked for me


  23. Caralhos Que Ta Fodam
    April 15, 2020 @ 8:36 PM

    You are a genious. You help me so much thank you


  24. ayahhanul-dj
    April 10, 2020 @ 6:59 PM

    Great share since I use wsl2 to run ubuntu on windows 10 home, vmmem require less resources of ram compared to non activated Hyper-V, it is only 10% required to run since activating it.
    Thanks a lot for your work… :)


  25. Napster
    March 25, 2020 @ 5:00 AM

    Genial, funciona, aun no instalo ninguna maquina, pero si se instalo el Hyper-V
    Busque en muchos lados la forma de instalar el Hyper en Windows 10 Home y no encontre solution por ningun lado.
    Gracias por el dato.

    Espero que cuando instale las Virtuales funcionen igual que en Windows 10 Enterprise

    (Great, it works, I still didn’t install any machine, but if I install the Hyper-V
    I looked for many ways for installing Hyper in Windows 10 Home and I found no solution anywhere.
    Thanks for the information.

    I hope that when you install the Virtual machines they will work the same as in Windows 10 Enterprise)


Leave a Reply to Ivan Herreño Cancel reply

Your email address will not be published. Required fields are marked *